DIY Glass Bottle & Wood Vase


 

Found This At Shanty 2-chic

 

Materials

  • 1 x 6 x 8 Pine or Whitewood Board
  • 1 3/8″ Ryobi Forstner Bit
  • Drill
  • Brad Nailer
  • Wood Glue
  • 8 Soda Bottles

Directions

  • First, you need to make your cuts!  I used my  miter saw to make the cuts below.  These pieces are all cut from the 1 x 6 board.  
  • My top and bottom pieces are both 30″ and the sides are 8.25″.  If you are using different bottles than I am using, make your cuts on this part 1/2″ shorter than the height of your bottles.

Find More Here