Found This At Lil Luna
Materials
- Main wood piece {I used a cabinet door front}
- Finial {top wood piece}
- Spool
- Oval Wood Piece for base
- Drill
- Wood Glue
- Spray Paint
- Sand Paper {to distress}
- Clothes pin
Directions
- Mark the center of your main wood piece on the top and the bottom based off of the width of the board and the thickness of the board.
- Drill a hole slightly larger than the screw on the finial. *If you want to make the holder sturdier and with smoother transitions, you can flatten the connecting parts on the frame using a forstner bit.
Find More Here