Found This At Shanty 2-chic
Materials
- 1 x 6 x 8 Pine or Whitewood Board
- 1 3/8″ Ryobi Forstner Bit
- Drill
- Brad Nailer
- Wood Glue
- 8 Soda Bottles
Directions
- First, you need to make your cuts! I used my miter saw to make the cuts below. These pieces are all cut from the 1 x 6 board.
- My top and bottom pieces are both 30″ and the sides are 8.25″. If you are using different bottles than I am using, make your cuts on this part 1/2″ shorter than the height of your bottles.
Find More Here